ST-44 Fast Clamp drops 30%. Our steadfast philosophy of more for less makes us rethink and improve this old product from our catalogue of press brake tools and accessories.
WHY ARE WE LOWERING THE PRICE?
ST-44 Fast Clamp drops 30%, the ST-44 for Promecam type punches, with lateral removal and insertion, is a product from more than 30 years ago and, logically, times as well as manufacturing methods have changed.
Therefore, the change in production machinery, the increase in sales and the optimisation of each and every one of the processes has enabled us to reduce the price by more than 30%. This way, we can offer a Fast Clamp that is affordable for everyone, and customers can consider it a standard option to equip all their sheet metal press brakes and once and for all forget about tightening and loosening screws to change their bending tools.
A WIDE RANGE
We pride ourselves on having the most comprehensive and affordable range of sheet metal press brakes. Let’s have a look at our wide range:
ST-50 FAST CLAMP
The seasoned clamp went into mass production in mid-2017. So far it has been a huge sales success and we have shipped it halfway around the world.
Advantages
– Quick mooring with a handle, with no need to tighten screws or use spanners to moor punches.
– High adjustment tolerance as the handle can rotate; there is always plenty of play to tighten more or less.
– The handle can be removed without having to disassemble the clamp (if it gets in the way of any bending).
– Very cost-effective product that quickly pays for itself.
Drawbacks
– The handle can get in the way in some bending operations, but it can be removed without removing the clamp.
The following video shows how practical and functional the clamp can be:
ST-44 FAST CLAMP
This clamp has been manufactured for more than 30 years, but has now experienced a price drop due to new manufacturing methods.
Advantages
– Quick mooring with a handle, with no need to tighten screws or use spanners to moor punches in a Promecam press brake.
– The handle is integrated in the clamp and never gets in the way and it does not hit the sheet metal during bending operations.
Drawbacks
– The handle has a small adjustment range and the screws may have to be adjusted when assembling a small section of the punch.
The following video shows how practical and functional the clamp can be:
ST-100 FAST CLAMP
This clamp was launched on the market in mid-2020 and its features make it UNIQUE worldwide.
Advantages
– Quick mooring with a side handle (and with the possibility of disassembly if necessary), with no need to tighten screws or use any type of spanner.
– It incorporates a safety button to enable FRONT or side removal and insertion of the punches if they are very heavy.
– It is a very aesthetic clamp and is fully integrated in the intermediate position. Therefore it never gets in the way and it does not hit the sheet metal during bending operations.
Drawbacks
– If there is one, it is that its price is higher than that of the ST-44 and ST-50, as it has several mechanisms to guarantee the regulations and to ensure FRONT removal and insertion of the punch with complete security.
The following video shows how practical and functional the clamp can be:
