METALMAQ manufactures dies with Wila mooring, for MEBUSA press brake with quick tool change.

CUSTOMER WITH MODIFIED MEBUSA PRESS BRAKE

Our client contacts us to manufacture for him a set of 3 meters of dies type WILA (5 of 500 m/m plus a fraction ), but with the fast “Safety Klick” mooring , which is normally installed in the press brake punches such as TRUMPF , AXIAL – AXIMAQ, LOIRE, Beyeler – Bystronic and other brands of press bakes with Wila type mooring.

Not being accustomed we ask the customer for a photo ;

Matriz WILA del cliente, con plegadora de amarre doble
Customers’s die WILA, with double mooring press brake

He explains that in his day they took their old press brake MEBUSA and made a “retrofiting”, they also decided to install in the dies the same system that all the above metioned press brakes have in the punches. As you can see in the picture, in the background you can see the mooring of the press brake and it can be observed that it is the same in both in the upper part and at the bottom, very unusual in the metal sheet press brake market.

METALMAQ MANUFACTURES SPECIAL CUSTOMIZED DIES

Our Technical Office designs the dies with the customer’s specifications .
He accepts the budget for the manufacture of 5 dies with V of 12 m/m, at 30º, with a total height of 120 m/m and with the typical mooring of the Wila punches, but in this case in the die . The 5 dies are manufactured in sections of 500 m/m and another one is also manufactured in a section of 550 m/m and fractionated.

All dies are supplied with the “Safety Klick” button, which facilitates the extraction and introduction of the dies frontally and automatically . In each 500 m/m die two “Safety Klick” buttons are installed and in the fractionated die one button per section (less in the 200 m/m section where goes two buttons), in total the fractionated section has 10 “ Safety Klick” buttons.

The dies are manufactured in steel 42CrMo4 tempered by induction in the work areas and rectified, as usual in this type of dies type Wila / Speed / Beyeler.

In the following photos you can see a section of 500 m/m and a fractionated section, with the special upper mooring wila and the “Safety Klick” buttons installed.

RESULT

The result once the dies are delivered is another satisfied and grateful customer. On our part, another special manufacturing we had never done and another experience that enriches our company.

Comparte: