FAST CLAMP FOR AJIAL-COLLY MOORING mod. ST-70x150m/m
Due to the enormous success of the Fast Clamp for Promecam mooring ST-50 and the approach taken in the video about the great saving of more than 80% of the time in the fastening and extraction of tools that involves the use of fast clamps Metalmaq, customers with mooring AJIAL-Colly asked us:
For when a fast clamp for press brake with AJIAL-Colly mooring?.
Read on, you will discover that we already have it available in our shop!
Tooling Ajial-Colly
For historical reasons, the use of AJIAL-COLLY tooling has been reduced to two countries: France and Spain and large companies tend to improve products that have higher consumption. But not everything is volumes, we pay attention to all the suggestions and continue manufacturing and distributing tools for Ajial-Colly press brakes. So we understood that these customers needed to have a quick clamping system tooling.
Birth of a new clamp for press brake with Ajial-Colly mooring
In METALMAQ we take the problems or possible improvements of our customers as a challenge and so we start with the approaches, drawings, tests, prototypes and finally the production …… result: the first Fast Clamp with AJIAL-COLLY mooring on the market, the new ST-70 !!
Advantages of the fast clamping system Ajial-Colly ST-70
What advantages can we highlight about traditional manual flanges with screws?
- Effective and robust mooring
- The same pressure on the entire length of the mooring
- 80% saving in fixing time compared to the traditional clamp!!
- Safety system (anti-fall) of the punches
- Possibility of disassembling the handle without disassembling the clamp
- Quick clamping system extremely economical and quickly amortizable
Comparison of fixing time in traditional system (red) vs ST-70 fast system (green) in a 2Mts press brake.
- Traditional system with screws: 1’03 ”
- Fast clamping system ST-70: 13 ”
Special advantage to avoid “collisions” clamp – punch
We do not want this important advantage to go unnoticed: when the handle is opened, the ST-70 clamp is automatically separated from the intermediary (it separates just 1m/m so that the punch can be extracted), the clamp has two locations where the two springs are incorporated to that effect and thus avoids the typical “collisions” between clamp and punch of the conventional clamp when extracting or introducing the punches to the press brake. The springs are supplied with the clamp.
Vídeo of the new Fast Clamp AJIAL-COLLY ST-70
Do you want to see the new Ajial-Colly ST-70 fast clamp working? In the next video you will see the practical demonstration of its perfect operation and the comparison with the traditional bolt clamp.
Where to buy the fast clamp Ajial-Colly ST-70?
If you have read this article and your metal sheet press brake has the AJIAL-COLLY mooring, I do not think you have any doubt about the advantages of incorporating the new clamp. Do you want another big advantage? your ease of purchase in our Online Shop, you will receive it in your workshop without any effort
